EMFM- 0077

This flow meter matches with the standard of flow   meters now available in the market.It measures the  flow rate   in literes/sec format. It provides data in foot per second also.A calibrated flow prediction is displayed on the meter while not in zero flow condition.This value is made rewritable and stays non volatile even in power OFF condition.A computer interface is also available.A unique feature which  resets the totalizer  to       zero using a password is also avaliable.

The working model is ready and the technology is ready for sale.    A package of  things will be available with the technology transfer.

1. Embedded Software Design & Hardware Design.

2.   Mechanical drawings of the Overlay sticker.

3.   A demo version of KEIL software and ORCAD.

4. Mail based support for all type of clarifications during production.                     

EMFM-4513

All the features have been implemented. Prototype is ready.The product and technology transfer will be ready by the end of September 2014.This flow meter is dual coil type. It features 12bit ADC and so the resolution is upto four decimal places .Flow rate is available both in LPS (Literes Per Sec) and FPS (Foot Per Second).It has a built in totalizer which can be reset to zero using a password.It also has a Form Factor input which is software configurable by keyboard entry.It also features a software lock which will be actuated when a wrong password is entered.The wrong entry of the password will be checked three times and after that a power off/on of the device is required.It also has a pump switch which when made ON will enable the motor when device is ON.

The working model is ready and the technology is ready for sale.     A package of  things will be available with the technology transfer.

1. Embedded Software Design & Hardware Design.

2.   Mechanical drawings of the Overlay sticker in corel draw.

3.   A demo version of   CADENCE 16.0 & a full verision compiler.

4. Three unpopulated PCBs and other miscellenious items.

5. Mail based support for all type of clarifications during production

FMS-84

Prototype is ready.The product and technology transfer will be ready by the second week of December 2017.This circuit consist of a serial bus (RS232) bifurcated into two.One is mainly to control the GPS module and other is to control the GSM module.Latitude and Longitude are extracted from the NMEA 0183 string.A proper alogorithm is written in firmware to convert it into valid Latitude and Longitude.A valid GPRS connection is established and the data is send to the server.This data is read by the Java application and plotted on to a Google Map. If the GPRS signal cannot be established, it will then retry with a new latitude and longitude after 30 seconds.The time gap is configurable in software.Only one external connection, that is to the  twelve volt supply through the car charger.

TRAQ-007

This product is to be used as an android application to find location of buses (or any vehicle). Now presently it is configured with two features, namely single bus information and multi-bus information.In single bus information the user has to click on the bus image and then the corresponding location of that bus will be displayed with the trip data, location, and air distance.When you click the second option, the multibus information shows all the buses available at a particular distance (can be configured by the user) from passenger (user).The violet marker pin shows the current location of the passenger while the orange shows the location of the buses. The finished product is now available for sale.There is also a feature which checks WiFi / internet connection while you are using the app. A driver app is also developed for installing on the bus. Now presently the bus data available are dummies.

FMS-84 (Hybrid)

This product contains mainly two parts one part is the driver application (android) and other is the php code which helps to add,delete or edit vehicle details. The driver app needs to get itself installed on the driver's mobile.The web site code helps the user to find the latitude, longitude, speed, altitude date and time.The website code also have the admin and normal access.The admin acess helps the admin to find the users and the vehicle numbers their routes and also the history of the vehicles on a calender basis. The same history is available for each user separately on calender basis. Now presently the product is fully developed and is ready for sale. There is also a feature which checks WiFi / internet connection while you are using the driver app.

The working model is ready and the technology is ready for sale. A packet of  things will be available with the technology transfer.

1. Android software development tool (Eclipse).

2. Full source code of KSRTC driver app and KSRTC                    passenger app.

3. Both apk files (Driver App & Passenger App).

KP-100 (Java based)

This project was mainly developed for helping Kerala Police especially the traffic police (can be used for similar applications). This is basically an android based penality(leveing fine) and cash recovery system.The first app(APK file) can be used by the police to leavy fines for a particular misconduct of traffic rule (Say if a person is not wearing SEAT BELT). The flow of the code is like logging on to the server with username and password.Then select the particular traffic rule violation and then enter 10 digit mobile number of the traveller and the app directly send an SMS to the mobile user (Traveller) like an SMS alarm with an OTP and a case in the traffic police department will be filed. On the user app (second APK file) , after noting down the messsage details (OTP) and CODE (say ITEMCODE -0001).  Select the corresponding ITEMCODE    ( say ITEMCODE - 001) pay the leveied  fine (say Rs 20) using GooglePay and then enter the OTP.The money will be automatically transfered to the Kerala Police Department Account. In the back end (in database) after entering the OTP the token will be disabled making it a one time payment.Now about database support,I am giving it till November 2021. The php files required will also be given along with full version.This will help you to load the corresponding files on to any server.Lastly two demo videos also will be provided.

The working model is ready and the technology is ready for sale.  A packet of  things will be available with the technology transfer.

1. Android IDE (Compiler full version).

2. Full source codes and Two APK files.

3. Database support (till November 2023).

4. Demo Videos (Will only be shared at the time of product delivery).

5. Supports upto 5000 SMS.  

Shop

(Java based)

This product helps a user to select different apps (basically APK files) from the list of apps and then pay for the corresponding app selected through UPI id. Once paid the SHOP(app) downloads the selected app into the internal memory.Note: This feature disables a person (user) from copying to another (user) as it will not be visible. The SHOP(app) will provide a timeout after 120 sec and the user will have only four attempts. If download is not getting done the user will loose the money that was paid for buying the app from the list after four attempts. So make sure you are in good internet/WiFi connected area..!!!.The SHOP(app) works only from or above API  (level - 26).Now about database support,I am giving it till November 2021. The php files required will also be given along with full version.This will help you to load the corresponding files on to any server.Lastly a demo video also will be provided.

The working model is ready and the technology is ready for sale.  A packet of  things will be available with the technology transfer.

1. Android IDE (Compiler full version).

2. Full source code and APK file.

3. Database support (till November 2023).

4. Demo Video (Will only be shared at the time of product delivery).

BUS DRL Flasher

(Commercial Project)

This project was mainly developed with the inspiration from

KOMBAN bus (a famous luxury video coach in kerala).The prototype is ready.The project mainly works on a 8-bit microcontroller.The prototype is mainly used to control twenty four DRL lights using relay and mosfets.There are mainly three boards, one is the bottom board (which contains the microcontroller) and the next, the middle board and the top board which are used to control eight seperate DRL lights.The programming is mainly in C language.A 24V from battery of bus is required for making it fully functional.For development purpose the prototype can be made to work on a 12-0-12V AC transformer.The three boards consume 5Amps in total on full load.All the details will be given on the DVD which comes with the product.

AutoTAXI

(Commercial Project)

I got an enquiry to the earlier discussion that I have made that is, I am referring to the functional block diagram of an autorickshaw meter. On the first part (K-Meter), it basically consist of an 8-bit microcontroller with a display and an EEPROM interface.There are two switches connected to it, one is for adding the collection of the day, second is for viewing the collection of the day.If both pressed on POWER ON will reset the collection to zero (ie. it can be used while starting up a day).

The second part (K-Prom) an addon, special programmer (ie. if it is to be used for commercial purpose) can be connected with a special jack on cable to the main board which contains the microcontroller and programmed, if any tariff rate changes for example.Before starting the project, the client is requested to inform RRNSOFT about that,if there is a requirement for the second part.

The prototype will be ready within a period of say maximum of six weeks.On purchase of this project, a group of things will be delivered as listed.All the details relating to this will be available on the DVD which comes along with the product.

Water Level Controller

(Domestic/Residential Project)

A few days before, it was World Water Day. So keeping that in mind,a spark of an idea came to my mind. "Conserve Water". Coming to engineering, you can design a Water Level Controller to do that. With an 8-bit microcontroller, an 8-bit display, an EEPROM,and an LED array and ofcourse with a good design, you can do that.So on the PCB side there are three switches which sets the Water Level. One is the UP Switch other is DOWN and the last one is the ENTER Switch.Microcontroller recognises the set level and when the water level reaches the level or goes below it the motor automatically turns ON.Once it reaches the top level, the motor turns OFF.This makes the entire process automatic making it a fool proof design.The prototype will be ready within a period of say maximum of six weeks.On purchase of this project, a group of things will be delivered as listed.All the details relating to this will be available on the DVD which comes along with the product.

Automated GATE Opener

(Domestic/Residential Project)

Another foot step in embedded electronics is about the thought of an automated GATE opener/closer. The project is designed for only sliding gates,May be if you dig in about the mechanical side, it can also be used for hinched gates also.The transmitter board will be the size of a keychain. On the receiver part it will be a bigger circuit with some digital and power electronics parts and a motor. A calibration is to be done by pressing a switch and allowing to close the GATE. This data will be stored in the memory and once you press the keychain (RF transmitter) the closing or the opening will be done with the recorded time which was stored in the memory.The prototype will be ready within a period of say maximum of six weeks.On purchase of this project, a group of things will be delivered as listed.All the details relating to this will be available on the DVD which comes along with the product.

My (Students) Project

If you have any new Project ideas, you can mail me or whatsapp me to my number. I will try to help you.Technical support will not be charged. 

For example, if you are planning to make an autorickshaw meter, the functional block diagram may look like this.

Study : Make a through study on different types of sensors available and their advantages and disadvantages.Consult a mechanic and learn about the sensors used in the available digital meters.If possible try opening a digital autorickshaw meter and collect the waveforms of different setups with a CRO.

Risk : Complexity involved is very high.If you have the good support of relevent people with both theoritical knowlege (staff of different departments) and people with practical knowlege like an auto mechanic/technician, you will succeed.   

I have very less knowlege on this particular sensor side.

If you require any further help, go to CONTACT page and fillin all the details with your phone number in message.

Tablet based CRO

(Students Project)

This project was mainly developed for students. The prototype is ready.The project mainly works on a 8-bit microcontroller. The CRO is based on an android app which works on a 7 inch Tablet as well as on the Windows based PC. It can detect both analog and digital signals and is configured for two channels.Calibration is available for a clock signal as well as a +5V supply. Timebase can be varied and mostly it detects the timebase automatically.The power supply is on a usual USB charger and while not in use it is required to get it charged full. While it used as an oscilloscope it works on a battery.At that time it cannot be charged.All the details will be given on the DVD which comes along with the product.

Artificial Intelligence based Electronic EYE

(Students Project)

This project was mainly developed for students. The prototype will be ready in 4-6 weeks time after getting the order. The project mainly works on a 8-bit microcontroller. Sensor used is a camera with a few LED array and it can basically detect three colours. Whenever a coloured paper is kept in front of the camera, the microcontroller will detect the colour and display it as text on the 8- bit display. On final delivery of the project the group of the things will be given as per the "view details"  on the adjacent column. All the details will be given on the DVD which comes with the product.

Intelligent CAR A/C

(Students Project)

This project was mainly developed for students. The prototype is ready.The project mainly works on a 8-bit microcontroller.Sensor used is of one wire type with 12-bit data resolution.An EEPROM is available for setting the temperature.The temperature can be varied from 16 degrees to 32 degrees in steps of 0.5 degrees.The relay which has to be connected to the positive lines (IN and OUT) of the A/C which gets powered ON when the sensor read value is greater than the set value which is stored in the EEPROM.As the sensor detects a temperature with 2 degrees less than the set value the relay turns OFF making the A/C to turn OFF. The set value (temperature) can be varied by push ON switches.All the details will be given on the DVD which comes with the product.

Automated Wireless Charger

(Students Project)

Last month after meeting a group of students at an electronic shop, I was surprised to hear an idea from them. The concept was to make a wireless charger.It basically consist of an 8-bit microcontroller with display and an EEPROM interface.User can vary the time for charging using the four switches available.This value is stored in the EEPROM.When the microcontroller detects a mobile which is inserted in the cradle, the counter will start.The relay will be turned ON. Once the counter reaches the SET Time it will switch OFF the relay making it to complete the cycle.The prototype is now ready.On purchase of this project, a group of things will be delivered as listed.All the details relating to this will be available on the DVD which comes along with the product.